TOONLOK ST Pontoon Accessory Track Starter Kit

Founding Customer Offer — limited to the first 10 kits.

The TOONLOK ST Pontoon Accessory Track Starter Kit is the simple way to start using TOONLOK. Instead of choosing your Track and first accessory separately, you get one ready-to-fish setup:

• 1 TOONLOK ST Track – 6-inch section
• 1 TOONLOK Rod / Net / Flag Holder with all mounting hardware
• 1 matching set of ST End Caps
• Standard mounting hardware
• Free standard U.S. shipping

The 6-inch ST Track section adds a 3-inch-wide marine accessory track interface to compatible pontoon fencing, and the included Rod / Net / Flag Holder gives you an accessory you can use right away for a compatible fishing rod, landing net, or flag pole.

Start Here. Expand Later.

The included Track section is 6 inches long and provides a 3-inch-wide marine accessory track interface. Start with this single section, then connect additional TOONLOK 6-inch Track sections to create a longer continuous accessory track, or install additional sections separately in other locations around your pontoon. Add other compatible TOONLOK accessories as your boating or fishing setup grows.

Start with what you need today. Add more track and accessories as your setup grows.

What's Included

• 1 TOONLOK ST Track – 6-inch section
• 1 TOONLOK Rod / Net / Flag Holder with all mounting hardware
• 1 matching-color set of TOONLOK ST End Caps
• 2 stainless-steel mounting bolts
• 2 washers
• 2 nylon-insert lock nuts
• Free standard U.S. shipping

Key Features

• Complete starter Track and accessory setup
• 6-inch TOONLOK ST Track section
• 3-inch-wide marine accessory track interface
• TOONLOK Rod / Net / Flag Holder included
• Matching ST End Caps included
• Modular and expandable design
• Connect additional 6-inch Track sections as the system grows
• Works with TOONLOK track-mounted accessories
• Compatible with many accessories designed for compatible 3-inch marine track systems
• Marine-grade, UV-resistant ASA Track construction
• Stainless-steel mounting hardware
• Designed, tested, and manufactured in Michigan
• Patent pending
• Free standard U.S. shipping

ST Track Fit

TOONLOK ST Track is designed for most standard pontoon fencing with exposed square upper fence tubing up to 1.25 inches wide. ST is generally the right choice when:

• The exposed square upper fence rail/tubing is 1.25 inches wide or less
• Exterior fence sheathing ends below the top of the upper tubing
• Enough exposed upper rail is available for the ST Track to properly fit around it

If the exterior fence sheathing extends all the way to the top of the rail and makes the complete fence/rail assembly wider than 1.25 inches, you should generally use TOONLOK AT Track instead. AT Track fits compatible assemblies more than 1.25 inches and up to approximately 1.5 inches wide and includes adjustable fit shims.

Boat manufacturer alone does not determine ST versus AT fit. Fence construction and actual overall width do. Not sure? Send a clear photo and measurement of your upper fence/rail assembly to support@listmarinesolutions.com before ordering.

Included Rod / Net / Flag Holder

The included TOONLOK Rod / Net / Flag Holder provides a track-mounted storage location for a compatible:

• Fishing rod
• Landing net
• Flag pole

It can be repositioned along compatible Track or removed when not needed.

Cross-Compatible 3-Inch Marine Track System

TOONLOK uses a 3-inch-wide marine accessory track interface. The included ST Track accepts many accessories made for compatible 3-inch marine track systems, including compatible accessories from manufacturers such as Bert's Custom Tackle and Traxstech, and many TOONLOK track-mounted accessories can also work with compatible 3-inch tracks from other manufacturers. Compatibility depends on the dimensions and profile of the individual track and accessory and is not guaranteed with every product or model.

Bert's Custom Tackle, Traxstech, and other referenced brands are trademarks of their respective owners. TOONLOK and List Marine Solutions LLC are independently owned and are not affiliated with, sponsored by, or endorsed by these companies. Brand names are referenced solely to describe potential product compatibility. Compatibility varies by track profile, accessory, and model. Verify fit before ordering.

Installation

The ST Track mounts around compatible upper pontoon fence tubing using its included stainless-steel hardware. Some pontoon models require drilling with a 1/4-inch drill bit (not included). Inspect both sides of the fence for wiring, cables, and other obstructions before drilling, and do not overtighten the mounting hardware. Please review the TOONLOK Fit Guide and Installation Instructions before ordering or drilling.

Once the Track is installed, mount the included Rod / Net / Flag Holder into the Track.

Designed, tested, and manufactured in Michigan. Patent pending.

Free standard U.S. shipping on this kit.

TOONLOK — Built to Expand.