TOONLOK AT Pontoon Accessory Track – 6" Modular Track

The TOONLOK AT Track turns compatible wider pontoon fence assemblies into a 3-inch-wide marine accessory track. Mount, remove, reposition, and change compatible fishing and boating accessories without permanently mounting each one to your boat.

Each TOONLOK AT Track section is 6 inches long and provides a 3-inch-wide marine accessory track interface. Install one section as an individual mounting location, or connect multiple 6-inch sections for a longer continuous track. Two sections connect to create a 12-inch track section. Sections can also be installed separately in different locations around your pontoon.

AT fits fence assemblies where the exterior sheathing extends all the way to the top of the rail, more than 1.25 inches and up to approximately 1.5 inches wide. Boat brand alone does not determine fit. Unsure? Send a photo and measurement to support@listmarinesolutions.com before ordering.

Designed, tested, and manufactured in Michigan. Patent pending.

$9.99 flat-rate shipping • Free U.S. shipping on orders of $99 or more

Start with what you need today. Add more track and accessories as your setup grows.

Key Features

• Converts compatible wider pontoon fence assemblies into a 3-inch-wide marine accessory track
• Designed for compatible fence assemblies more than 1.25 inches and up to approximately 1.5 inches wide
• Designed especially for fencing where the exterior sheathing extends all the way to the top of the rail
• 3 adjustable fit shims included
• 6-inch modular track section
• Use one section individually or connect multiple sections for a longer continuous track
• Expandable modular design
• Works with TOONLOK track-mounted accessories
• Compatible with many accessories designed for compatible 3-inch marine track systems
• Allows compatible accessories to be installed, removed, and repositioned
• Marine-grade, UV-resistant ASA construction
• Stainless-steel mounting hardware
• Designed, tested, and manufactured in Michigan
• Patent pending

What's Included

• 1 TOONLOK AT Track – 6-inch section
• 2 stainless-steel mounting bolts
• 2 washers
• 2 nylon-insert lock nuts
• 3 adjustable fit shims

AT Track Fit

AT Track is designed for pontoon fencing where the exterior fence sheathing extends all the way to the top of the rail and makes the overall fence/rail assembly wider than 1.25 inches (1¼"). It fits compatible assemblies more than 1.25 inches wide and up to approximately 1.5 inches wide. The 3 included adjustable shims can be used as needed to eliminate side-to-side clearance and achieve a proper fit.

Some Avalon, Tahoe, and other pontoon models use this wider, full-height fence style, but boat brand alone does not determine fit. Check these three things before ordering:

1. Does the exterior fence sheathing extend all the way to the top of the rail?
2. Is the complete fence/rail assembly wider than 1.25 inches?
3. Is the complete assembly approximately 1.5 inches wide or less?

If your exposed square upper rail is 1.25 inches wide or less, you should generally choose TOONLOK ST Track instead.

Not sure? Send a photo and measurement to support@listmarinesolutions.com before ordering.

Build Your Pontoon Accessory System

TOONLOK AT Track creates a modular pontoon accessory mounting system for wider, full-height fence assemblies. Depending on your setup and compatible accessories, it can provide mounting locations for:

• Fishing rod holders
• Cup holders
• Downrigger mounts
• Electronics mounts
• Lights
• Tables
• Other compatible boating and fishing accessories

Accessories are sold separately unless specifically stated otherwise. Compatible accessories can be installed, removed, changed, and repositioned as your fishing or boating setup changes.

Cross-Compatible 3-Inch Marine Track System

TOONLOK uses a 3-inch-wide marine accessory track interface. TOONLOK AT Track is designed to accept many accessories made for compatible 3-inch marine track systems, including compatible accessories from manufacturers such as Bert's Custom Tackle and Traxstech. Many TOONLOK track-mounted accessories can also be used with compatible 3-inch tracks from other manufacturers.

Compatibility depends on the dimensions and profile of the individual track and accessory and is not guaranteed with every product from another manufacturer.

Bert's Custom Tackle, Traxstech, and other referenced brands are trademarks of their respective owners. TOONLOK and List Marine Solutions LLC are independently owned and are not affiliated with, sponsored by, or endorsed by these companies. Brand names are referenced solely to describe potential product compatibility. Compatibility varies by track profile, accessory, and model. Verify fit before ordering.

Installation Overview

Position the AT Track around the compatible upper pontoon fence assembly and secure it using the included stainless-steel hardware. Use the included adjustable shims as necessary to eliminate unwanted side-to-side clearance and achieve a proper fit. Some pontoon models require drilling with a 1/4-inch drill bit, which is not included. Review the TOONLOK Fit Guide and Installation Instructions before ordering or drilling.

Choose the Right TOONLOK Track

• ST Track: For most standard pontoon fencing with exposed square upper rail/tubing up to 1.25 inches wide.
• AT Track: For pontoon fencing where the sheeting extends all the way to the top of the rail and makes the overall fence assembly wider than 1.25 inches (1¼"). Fits compatible assemblies more than 1.25 inches and up to approximately 1.5 inches wide and includes adjustable shims for proper fit.
• Surface Mount Track: For fishing boats and other marine applications with an appropriate flat mounting surface.

TOONLOK — Built to Expand.